|
|
 |
| • |
Clip-on type mounting plate for easy attachment. |
| • |
Keeps flap/lid from slamming down or flying open. |
| • |
Recognized by LGA for 50,000 cycles |
| • |
Opening/closing speed is adjustable. |
| • |
Opening angle is adjustable by changing mounting position. |
| • |
Euro screw applicable.(NSDX-35/NSDX-35 2S) |
| • |
Handed |
|
 |
 |
NSDX-10 PAT |
|
|
|
|
|
DOWNWARD-OPENING FLAP
with Piano, Butt or Drop Hinges. |
|
|
|
| Material |
: |
Zinc Alloy,
Steel |
|
|
|
|
|
|
|
|
|
| Supplied with screws (3.5×15) |
|
|
|
| NSDX-10 is designed to securely latch a flap closed. |
|
|
|
Torque
Calculation |
: |
Torque = Door Height×1/2×Door Weight |
| Per Piece |
: |
1.96-6.86 N・m( 20- 70kgf・cm) |
| Per Pair |
: |
3.92-13.72N・m(40-140kgf・cm) |
|
|
| Item No. |
| NSDX-10R |
| NSDX-10L |
|
|
|
|
|
|
|
NSDX-20 PAT |
|
|
|
|
|
TOP-OPENING FLAP
with Piano, Butt or Concealed Hinges. Oblong Holes of the Mounting Plate Allow Flap Opening Angle Adjustable from 70° to 105°. |
|
|
|
| Material |
: |
Zinc Alloy,
Steel |
|
|
|
|
|
|
|
|
|
| Supplied with screws (3.5×15) |
|
|
|
| NSDX-20 is designed to hold a flap in the fully opened position. |
|
|
|
Torque
Calculation |
: |
Torque = Door Height×1/2×Door Weight |
| Per Piece |
: |
1.96-6.86 N・m( 20- 70kgf・cm) |
| Per Pair |
: |
3.92-13.72N・m(40-140kgf・cm) |
|
|
| Item No. |
| NSDX-20R |
| NSDX-20L |
|
|
|
|
|
|
|
NSDX-35 PAT |
|
|
|
|
|
UPWARD-OPENING FLAP
with Piano, Butt or Concealed Hinges. Oblong Holes of the Mounting Plate Allow Flap Opening Angle Adjustable from 80° to 100°. |
|
|
|
| Material |
: |
Zinc Alloy,
Steel |
|
|
|
|
|
|
|
|
|
| Supplied with screws (3.5×15) |
|
|
|
NSDX-35 is designed to securely latch a flap closed and hold the flap in the fully opened position.
Two stop version (65°,90°) is also available. |
|
|
|
Torque
Calculation |
: |
Torque = Door Height×1/2×Door Weight |
| Per Piece |
: |
1.96-6.86 N・m( 20- 70kgf・cm) |
| Per Pair |
: |
3.92-13.72N・m(40-140kgf・cm) |
|
|
| Item No. |
| NSDX-35R |
| NSDX-35L |
|
|
|
|
|
|
|
NSDX-35 2S PAT |
|
|
|
|
|
UPWARD-OPENING FLAP
with Piano, Butt or Concealed Hinges.
2 Stop Opening Angle at 65°/90° available. |
|
|
|
| Material |
: |
Zinc Alloy,
Steel |
|
|
|
|
|
|
|
|
|
| Supplied with screws (3.5×15) |
|
|
|
NSDX-35 is designed to securely latch a flap closed and hold the flap in the fully opened position.
Two stop version (65°,90°) is also available. |
|
|
|
| Torque Calculation |
: |
Torque = Door Height×1/2×Door Weight |
| Per Piece |
: |
1.96-4.9N・m( 20- 50kgf・cm) |
| Per Pair |
: |
3.92-9.8N・m(40-100kgf・cm) |
|
|
| Item No. |
| NSDX-35R 2S |
| NSDX-35L 2S |
|
|
|
|
